SMPS /power/LED power/display power from China manufacturer - Shenzhen Longrich Energy Sources Technology CO.,Ltd

Price:	26.0~32.0 USD
Payment Terms:	T/T
Place of Origin:	Guangdong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: LR-UPS200 PV5

Delivery Date: 25~30 days

Brand Name: LongRich

Output Frequency: 47~63Hz

Means of Transport: Ocean,Land,Air

Output Power: 201 - 300W

Output Voltage: 5V DC

Output Current: 40A

1.Protections:Short circuit/Overload/Over voltage/Over temperature
2.Built-in active PFC function

MODEL			LR-UPS200 PV5
OUTPUT	DC VOLTAGE		5V / (4.2V)
	RATED CURRENT		40A
	CURRENT RANGE		0-40A
	RATED POWER		200W
	RIPPLE&NOISE		70mVp-p
	VOLTAGE ADJ.RANGE		4.9-5.1V / (4.1-4.2V)
	VOLTAGE TOLERANCE		±1%
	LINE REGULATION		±0.5%
	LOAD REGULATION		±1%
	HOLD UP TIME(Typ)		50ms/230VAC at full load
INPUT	VOLTAGE RANGE		90-264VAC
	FREQUENCY RANGE		47-63Hz
	EFFICIENCY (Typ)		>85% /230VAC >80%/115VAC at full load
	POWER FACTOR (Typ)		PF>0.95 at full load
	AC CURRENT	115VAC	2A at full load
		230VAC	1A at full load
	INRUSH CURRENT (Typ)		<36A/230VAC <15A/115VAC at full load
	LEAKGE CURRENT		<0.5mA
PROTECTION	OVERLOAD		115-130% rate output power
			Protection type:Constant current limiting,recovers automatically after fault conditiond is removed
	OVER VOLTAGE		5.5V
			Protection type:Shut down o/p voltage,re-power on to recover
	OVER TEMPERATURE		80℃±5℃
			Protction type:Shut down 0/p voltage,recovers automatically after temperature goes down
ENVIRONMENT	WORKING TEMP		–20~+60℃
	WORKING HUMIDITY		5~95% RH
	STORAGE TEMP.,HUMIDITY		–40~+85℃.5~95% RH
	TEMP.COEFFICIENT		±0.05% (0~50℃)
	VIBRATION		10~100Hz 2G 10min./1cycle,60min.each alongX,Y,Zaxes
SAFETY	WITHSTAND VOLTAGE		I/P-O/P:3KVAC,5mA I/P-FG:1.5KVAC,5mA, O/P-FG:0.5KVAC,5mA
	ISOLATION RESISTANCE		≥100M
OTHERS	MTBF		50000hours
	DIMENSION		2206026mm(LWH)
	PACKING
NOTE	1.All parameters NOT specially mentioned are measured at 230VAC input,rated load and 25℃ of ambient temperature
	2.Ripple&noise are measured at 20MHZ of bandwidth by using a 12"twisted pair-wire terminated with a 0.1uf&47uf parallel capacitor.
	3.Tolerance:includes set up tolerance,line regulation and load regulation.
	4.The power supply is considered a component which will be installed into a final equipment.The final equipment must be re-confirmed
	that it still meets EMC directives.
	5.Derating may be needed under low input voltages,Please check th derating curve for more details.